10
EM-210DVI/410DVI
EM-210DVI/410DVI
9
Powering-Up the KVM Switch
1.Connect the barrel of the 9V, 600mA power adapter to the power jack on the
rear of the Switch. Then plug the power adapter cable into an available power
outlet.
Connecting Microphone and Speakers (Optional)
1.Connect your speakers/headphones (3.5mm) and microphone (3.5mm) as
designated by the "Speaker" and "Microphone" symbols.
Note:
The Switch's front speaker and audio port or the rear panel console
speaker and audio port can be conveniently used. Using both front and
rear speaker / audio ports simultaneously will result in loss of audio.
Connecting the Console
1.Power off all computers.
2.Connect your PS/2 keyboard and PS/2 mouse directly into the PS/2 keyboard
and mouse ports (as designated by the console "keyboard" and "mouse"
symbols) on the rear of the KVM switch.
3.Connect your DVI monitor cable to the console DVI monitor port (as
designated by the console "monitor" symbol) on the rear of the KVM switch.
4.Connect any USB devices you wish to share as "USB Device 1, USB Device
2" on the front panel of the KVM switch.
Note:
When sharing USB devices, do not switch while devices are operating.
9V, 600mA Power Adapter
Rear View
Front View
