Rev. 3 02-2021
55
R
S
1
2
3
4
5
MTEC.DXi.H/DXi.HF.GB-3 Use and Maintenance technical manual DXi.H/DXi.HF English
Emibyte DXi.H/DXi.HF
Direct expansion close control
.H\VIXQFWLRQ
Allows the entrance to alarm display with manually reset possibility.
Allows the entrance to main Menu.
Back to the previous or standby mask.
6FUROOLQJWKH0HQXRUWKHYDOXHVWREHPRGL¿HG
(QWHU$OORZVWRHQWHULQWKHSDUDPHWHUWREHPRGL¿HGRUWKHHQWUDQFHWRWKHVHOHFWHGPHQX
6FUROOLQJWKH0HQXRUWKHYDOXHVWREHPRGL¿HG
8VHULQWHUIDFH
The below picture is the standby visualisation.
1
Date and hour
2
Regulation probes (SUction air “R” and discharge air “S”). In case of humidity enabled, the temperature value is alternated to
humidity one.
3
Compressors mode; thermoregulation request and actual discharge fan speed.
4
Unit mode:
Stand by
Only fan active, no cooling required.
Off by alarm
Unit OFF for serious alarm
Off by BMS
Unit OFF from supervision control
Off by sched
Off by sched
Off by DI
Unit OFF by digital input
Off by keyboard
Unit OFF by keyboard
Manual mode
Unit with at least one device in manual mode
Start-up
BLDC compressor ON with start-up speed
Shutdown
Power decrease after switch OFF request
Safety off
Off safety
High Delta P
BLDC compressor wait about pressure reduction for start
Cooling
Cooling ON unit
Restarting
BLDC compressor tryng to restart
Wait timings
Waiting, compressors OFF for timing
Oil recovering
BLDC oil recovery function enabled
Off by network
Unit OFF by duty-standby function
Destabilization
Oil recovery function enabled using destabilisation system
'HKXPLGL¿FDWLRQ
'HXKPLGL¿FDWLRQHQDEOHG
Pump down
Pump down enabled mode
Heating
Heating ON unit
Freecooling
Freecooling ON unit
5
Quick access Menu