emicol STORM ST201, Руководство пользователя

Страница: 6 / 20

▶ Press key until [PAr] appears
▶ Press . You will see [ACC]
▶ Press . You will see [0]
▶ With the keys choose the code [123] and press . You will see [PAS]
▶ With the keys choose the parameter to be adjusted and press
▶ Use the keys to edit the desired parameter and press
▶ Use the keys to choose another parameter if necessary or wait a few seconds to automatically exit the function
Notes:
▶ After 15 seconds of inactivity it will be necessary to re-enter the access password
▶ This function can also be accessed by pressing together the keys
▶ Four ACC options are available, as below:
▷ [99] Reset Controller to factory parameters
▷ [55] Field Test
▷ [123] Access to the complete parameter menu
▷ [231] Change the unit of measure to Celsius or Fahrenheit. The parameters are retained, this change will not
reset to the factory settings
Shortcut tip: Press the keys simultaneously to access the [PAr] menu
06
USER MANUAL
TEMPERATURE CONTROLLER
STORM ST 201
2.2 CONFIGURATION WITH FRONTAL KEYS
2.2.1 ADJUSTMENT OF THE SETPOINT TEMPERATURE DESIRED
(NORMAL SETPOINT AND ECO SETPOINT)
2.2.2. ADVANCED OPERATIONS (ACCESS THE COMPLETE MENU)
▶ Press until the message [SP] appears
▶ Use keys to modify the value
▶ Press to confirm
▶ Then the message [SPE] (ECONOMIC SETPOINT) will be displayed
▶ Use the keys to modify the value
▶ Press to save the parameters
3. EASY MENU FEATURES
By pressing and then the following sequence will be shown in the controller display
▶
[PAR] [SUF] [ECO] [DFR] [PRC] [Loc] [CTL] [SP] [SPE] [REG] [CR9]
▶
To access any of the functions, press