22
WIReD WALL COnTROL
figure 28 - Wired Wall Control
Wired Wall Control button Selections
pOWeR
Press to turn unit on or off.
MODe
Press to toggle through operating modes — Cool, Dry, Fan, Heat or Auto Changeover
CLOCK
Normal operation — hold 3 seconds to enter Set Time mode; hold again 3 seconds to exit. In programming mode
— press to enter previous selection
LOUVeR
*Press to toggle motorized louver on or off.
Up ARROW
Normal operation - press to increase the setpoint temperature. Configuration, Set Time or Programming modes -
press to increase the setting
DOWn ARROW
Normal operation — press to decrease the setpoint temperature. Configuration, Set Time or Programming mode
— press to decrease the setting
LefT ARROW
Press for previous item selection
RIgHT ARROW
Press for next item selection
fAn
Press to toggle between fan modes — High, Med, low or Auto.
pROgRAM
Normal operation — Press to toggle between manual operation and Pre-programmed (7-day) run mode.
Configuration, Set Time or Programming mode
TIMeR
Press to toggle Timer mode on/off
fAST
While in Heating or Cooling, press for 5 seconds enters Turbo mode for 30 minutes
MODe + pROgRAM
With unit in OFF mode — Press and hold 5 seconds to enter Configuration mode; press and hold 5 seconds again
to exit
p CLOCK
Press and hold 3 seconds to enter 7-Day Programming mode; press and hold 3 seconds again to exit
fAn + pROgRAM
With unit in 7-Day Programming mode — Press and hold 3 seconds to copy settings for selected day to all other
days
Display
MODe
COOl, DRY, FAN, HEAT, AUTO
