www.enviromaster.com
The ductless Split System of Choice
3
COMMON TO All AIR HANdlERS
SAFETY INSTRUCTIONS
Continued
The manufacturer of this unit will not be liable for any
damages caused by failure to comply with the installation
and operating instructions outlined in this manual.
A rating plate identifying this EMI Air handler can be
found on the unit. When referring to your unit, always have
the information listed on the rating plate readily available.
THE EMI dUCTlESS SplIT SYSTEM
AIR HANdlER FAMIlY CONSISTS OF
WCp:
Two-pipe chilled water fan coil wall unit avail-
able in 9,000, 12,000, 15,000, 18,000, 24,000, and
30,000 nominal Btuh capacities (hot water coil
not
available).
CCp:
Two-pipe chilled water and optional hydronic
heat fan coil ceiling units available in 9,000, 12,000,
18,000, 24,000, 30,000, 36,000, 42,000, and 48,000
nominal Btuh capacities.
All EMI Air handlers are backed by Enviromaster Inter-
national LLC and are tested and rated in accordance
with UL 1995.
INSTAllER SUpplIEd ITEMS
• Low voltage wiring (18
awg required)
• High voltage power supply wiring
• Mounting fasteners (screws, wall anchors, etc.)
• Chilled water, condensate piping
• Hot water piping
The EMI Air handler is available as a wall or ceiling unit
two-pipe chilled water fan coil model. The air handler offers
ease of installation, operation, and service. Presently, EMI
does not offer a chiller unit that provides chilled water for
the WCP and CCP models.
All EMI Air handlers are subject to on going product
development so designs and specifications may change
without notice. For more information on a specific air
handler, please refer to the corresponding section in this
installation manual or please visit our website @ www.
enviromaster.com or contact the factory for the appropriate
literature.
!
!
dANGER
Completely read all instructions prior to assem-
bling, installing, operating, or repairing this product.
Inspect all parts for damage prior to installation and
start-up. The EMI Air Handler must be installed only
by qualified installation personnel.
Check Unit Rating plate for proper power Supply!
THE EMI AIR HANdlER FAMIlY
Materials of Construction:
1. Cabinet fabricated of 20-gauge galvanneal steel
with an off-white powder coat matte finish
• Plastic tops, fronts constructed of a high impact
polystyrene (hips) material
2. Discharge grill construction of high temperature
Noryl plastic (WCP ONLY)
• Annodized Aluminum discharge grill CCP
3. Condensate drain pan constructed of anticorrosive
G90U galvanized steel
