CACG/CAHG & CACH/CAHH
Air Handlers
• Installation, Operation and Maintenance Manual •
P/N 240008108, Rev. B [082509]
3
Read Before Proceeding
Recognize this symbol as an indication of
important safety information.
WARNING
Completely read all instructions
prior to assembling, installing, oper-
ating, or repairing this product.
Inspect all parts for damage prior to
installation and start-up. The EMI Duct-
less high efficiency evaporator must be
installed ONLY by qualified installation
personnel.
DANGER
Tampering with this unit is danger-
ous
. Tampering voids all warranties.
DO NOT
attempt to modify or change
this unit in any way.
DANGER
The EMI ductless unit must:
Be connected to a properly grounded
•
electrical supply with the proper
voltage as stated on the rating plate.
Have proper overcurrent protection
•
(time-delay fuse/HACR Breaker) as
listed on the rating plate.
Ensure there are no power feeds to the
unit such as fire alarm circuits, BMS
circuits, etc.
Failure to follow these instructions can
result in a fire, explosion, or electrical
shock causing property damage, personal
injury, or death.
Safety Instructions
This manual is intended as an aid to quali-
fied service personnel for proper installa-
tion, operation, and maintenance of the
EMI Ductless high efficiency evaporator.
Read these instructions thoroughly and
carefully before attempting installation or
operation.
Failure to follow these instructions may
result in improper installation, operation,
service, or maintenance, possibly resulting
in fire, electrical shock, property damage,
personal injury, or death.
Read all instructions before using this
unit. Install or locate this unit only in ac-
cordance with these instructions. Use this
unit only for its intended use as described
in this manual.
Check the rating plate on the unit before
installation to make certain the voltage
shown is the same as the electric supply to
the unit. The rating plate is located on the
top panel only.
This unit must be connected only to a
properly grounded electrical supply. Do
not fail to properly ground this unit.
Turn off the electrical supply before servic-
ing the unit.
Do not use the unit if it has damaged wir-
ing, is not working properly, or has been
damaged or dropped.
