47
10. By pressing the device button, you finish the calculator mode.
If you make an operation which is not valid (e.g. division by 0), „DAT OVER“
displays. In this case press again the button CAL and do a new calculation.
TO SWITCH OFF ALL DEVICES
Press twice the button POWER – and the codes for switching off all devices will be
sent sequentially. When switching off, the backlight of the display blinks.
CAUTION
Do not expose the device to inadequate pressure and shakes or chemicals
The fall of the device can cause damage.
If you will not use the device for a prolonged time, do not leave it in:
- places with high humidity
- places with strong magnetic fields
- places exposed to extreme temperatures
- direct sunlight and close to a device which radiates heat
- features may vary depending on the current firmware version
WARRANTY INFORMATION
The warranty does not apply for compatibility of all controlled devices, especially
devices manufactured after the production date of the universal remote control,
moreover for the learning function for original and especially for non-original
remote controls. The warranty does not cover mechanical damages to the device
caused by its inappropriate use, e.g. button damaged by crushing or excessive
force or broken display, damages caused by dropping the device etc.
