41
5. While searching the remote control does not react to other buttons than PAUSE
and EXIT.
6. To leave the Auto search mode without saving changes, press the EXIT button.
7. If the device reacts, stop the search by pressing the PAUSE button. To save,
press the OK button. The LCD displays “SUCCESS“; exit to the normal mode
(twice press the EXIT button) and the setup process is finished.
8. Check the functionality of the buttons on the remote control, if they do not work,
repeat the process and select another device code.
* If the POWER OFF button does not have its own code in the TV mode, the CH+
code will be send.
If the POWER OFF button does not have its own code in the DVD, CD, VCR
modes, the PLAY code will be send.
If the POWER OFF button does not have its own code in the STB/CABLE modes,
the CH+ code will be send.
If the POWER OFF button does not have its own code in the AMP mode, the
MUTE code will be send.
If the POWER OFF button does not have its own code in other modes, the CH+
code will be send.
TO SET UP BY ENTERING THE CODE
1. Select with the button which kind of device you want to set up (TV, STB…).
2. Press and hold the SET button for 3 seconds.
3. With the buttons
select “CODE SETUP“ from the menu and
confirm by pressing the OK button. On the LCD screen, there will be displayed
“BRAND SEARCH“. With the buttons
select “CODE SET“ and
confirm with the OK button. Select the device you want to set up and press again
the OK button and enter the code using the numerical keys. Confirm then with the
OK button. If it is valid input, “SUCCESS“ displays. If it is invalid input, „NOT
FOUND“ displays. The invalid input means a code which is not on the list of the
particular device.
4. When you finish the input, exit to the normal mode (twice press the EXIT button)
and the setup process is finished.
5. Check the functionality of the buttons on the remote control, if they do not work,
repeat the process and select another device code.
TIME SETTINGS
1. Press and hold the SET button for 3 seconds.
2. With the buttons
select “CONFIGURE“ from the menu and
confirm by pressing the OK button. With the buttons
select “TIME
SETUP“ and confirm with the OK button.
