710052-3-4
en ma ev ol 2014
INSTRUCTION MANUAL
ASSEMBLY, INSTALLATION USE AND MAINTENANCE.
Rev. 07/2013
The producer declines every responsibility on any print and/or transcription mistake contained in this booklet
The producer can change features and datas of this booklet with the proposal of keeping on increase the quality of its products.
Anytime and without notice, this booklet can’t be considered as contract with third parties.
6
5. Cleaning and Maintenance
WARNING:
Before any cleaning operation unplug the device from the electrical
system. Never wash the appliance with water jets in order to prevent
water seepage inside the electrical components
Before any cleaning operation wait for the appliance to be cooled down
(wait at least one hour from the end of the service).
The thermic trolley should be cleaned with specific cleansers for stainless
steel and the chromed parts with alcool or specific cleansers for chrome
finish. In any case do not use abrasive products.
The trolley is supplied with a safety thermostat set to 150°C, which works in case of
malfunction of the electronic thermostat. To reset the system following an interruption due
to the safety thermostat, unscrew the control panel and push the red button on it.
5.1 Breakdowns
Problem
Possible cause
Solution
Power cut
Check the power presence
in the electricity network.
The heating element is burned
Contact the retailer
The thermostat is broken
Contact the retailer
The power switch is broken
Contact the retailer
The appliance does not
heat up
The power cable is worned-out
Replace the cable with a
new one with the same
technical features
