EMG velociptor ES 110 OR, Руководство пользователя

Страница: 13 / 24

13
1 Speed 2 Speed level 3 Mode button
4 Power button 5 Throttle 6 Battery charge level
7 Travel time 8 USB port (on the back of the display)
Values displayed
a / current speed in km/h
b / speed level: 1 - ECO up to 6 Km/h; 2 - DRIVE up to 20 Km/h; 3 - SPORT up
to 25 Km / h
c / Battery charge level (the indicator varies according to the instantaneous
load / consumption of the engine)
d / travel time
e / PAS: push start (you need a push to start the accelerator)
SPEED LEVELS
The scooter has three speed levels.
To change the speed level:
1. briefly press the power button: the speed level number starts flashing on
the display
2. Short press the Mode button to change the speed level
3. To save the desired level, briefly press the power button or leave the
display idle
Display functions
Short press the Mode button and the display will show the following infor-
mation:
• TRIP - single ride distance. Long press the Mode button to reset.
• ODO - total distance travelled in km
• VOL - current voltage (may fluctuate during running / instant load)
• CH TIME - when you switch to this function, the display turns off after 2
hours, for example it could be useful while charging a mobile phone from
the USB port
• TIME - travel time
When the display is inactive for 3 minutes, it will turn off automatically (if
the CH TIME countdown is not active).
Cruise control
When you keep the same speed for about 10 seconds, cruise control is acti-
vated: the symbol appears on the display.
Cruise control keeps the engine power constant (the speed may vary de -
pending on the slope of the terrain) even if the accelerator is not pressed.
The cruise control function is interrupted by pressing any brake lever or the
accelerator - the symbol disappears.
Display