STRINGS
.080- .125 inches
(2-3mm)
EMG-B Page 2
TO OUTPUT JACK
FROM PICKUP
SPACER
IF NEEDED
OUTPUT
T
R
S
1) Install the batteries
Install the batteries as shown in Diagram #1 with the
positive polarity facing up
Installation Instructions:
EMG Models: EMG-B (Bouzouki)
2) Wire it up
Route the cable as shown by paying attention to the
color codes marked on the pickup holder PC Board.
2) Attachment
A small screw is provided to attach the pickup to the end
of the fingerboard. Be sure the pickup is paralell to the strings
and use a spacer to adjust the pickup height near the distance
shown to the left.
