EMG ELDRO Ed 0/6.3 Скачать руководство пользователя

Страница: 17 / 83

Safety

Process media

2.6

ELDRO-Assembly-manual-344029-EN.docx

/ 83

2.6

Process media



The instructions on the manufacturer’s material safety data sheets

must be followed.



Contact with eyes or the skin should be avoided.



Avoid inhaling vapours or mist.



Soak up any spilled or leaking process media immediately with a

binding agent and dispose of it properly.



Keep containers with flammable substances and compressed,

liquefied gases away from sources of heat.

2.7

Modifications

Changes, attachments and modifications to ELDRO

components,

which could impair safety or functions may not be performed without
written approval from the manufacturer.

2.8

Spare and wear parts

The use of spare and wear parts from third-party manufacturers may
lead to risks. Only original parts or spare and wearing parts approved
by the manufacturer may be used.

For information regarding replacement thrusters for ELDRO

types that can no longer be supplied, see the “Ordering notes
for replacement thrusters” list.

Содержание ELDRO Ed 0/6.3




















































































Результаты поиска

Содержание ELDRO Ed 0/6.3

Отзывы:

Похожие инструкции для ELDRO Ed 0/6.3

Бренды по названию

Популярные бренды

EMG ELDRO Ed 0/6.3, Инструкция по сборке

Результаты поиска

Содержание ELDRO Ed 0/6.3

Отзывы:

Похожие инструкции для ELDRO Ed 0/6.3

Бренды по названию

Популярные бренды