EMF Motor EMF SQML160 Series, Руководство по эксплуатации

Страница: 15 / 43

14
www.emfmotor.com
The supply cables to the motor must be grounded and shielded, the shielding and the
grounding connection must be connected to the grounding of the motor.
6.3 Mounting of the Motor
The motor must be fixed to the platform with 4 bolts. These bolts must be used with lock
washers.
Type SQML100… motors must be fixed to the working platform with 4 pcs M16 8.8
bolts. The tightening torque of the bolts is 210 Nm. The tightening depth of the fixing
bolts must be 36 mm at least and 57 mm at most.
Type SQML132… motors must be fixed to the working platform with 4 pcs M16 8.8
bolts. The tightening torque of the bolts is 210 Nm. The tightening depth of the fixing
bolts must be 36 mm at least and 57 mm at most.
Type SQML160… motors must be fixed to the working platform with 4 pcs M16 8.8
bolts. The tightening torque of the bolts is 210 Nm. The tightening depth of the fixing
bolts must be 36 mm at least and 57 mm at most.
Type SQML200… motors must be fixed to the working platform with 4 pcs M18 8.8
bolts. The tightening torque of the bolts is 290 Nm. The tightening depth of the fixing
bolts must be 36 mm at least and 57 mm at most.
The bolts must be tightened to the specified torques
with a torque wrench. The fixing platform of the
motor must be rigid and solid enough to withstand to
the created force. The unevenness of the mounting
surface shall not exceed 0,1 mm. Rubber cushions
must be used during installation in order to dampen
vibrations.
6.4 Mounting of Rope Protection Clamps
The sheave and diversion sheave are manufactured according to EN 81-1 standard. The
rope selection must also be done according to EN81-1 standard.
WARNING!
Ropes that are used with 210-240 mm sheaves must be manufacturer
certified.