EMF Motor EMF SQML160 Series, Руководство по эксплуатации

Страница: 14 / 43

13
www.emfmotor.com
WARNING!
The terminal box cover must be kept closed during the installation of the
motor, because foreign objects could get in if the cover is open.
Suitable lifting equipment should be used when installing the motor. During the
installation, lever, hammer and similar tools should not be used. Especially the encoder
of the motor should not be subjected to impacts, because it has a sensitive electronic and
mechanical structure. Also the motor shaft should not be subjected to sudden impacts.
The motor can be connected horizontally or laterally. In case of lateral connection, the
bottom part of the motor must be supported and fixing bolts must not be exposed to the
shear force.
Drw-4
If the sheave has more rope channels than the actual number of ropes, the ropes must be
in the middle canals of the sheave or the channels closest to the motor shall be used.
The electrical connection must be made according to the connection diagram (see
Chapter 7.1). Motor supply and brake electrical cables must be laid inside a cable duct,
and the encoder cable must be laid inside a separate cable duct. In order to prevent
interference in encoder, it should not be laid side by side with the supply cables.
RISK OF ELECTRIC SHOCK!
To prevent risk of fire or electric shocks, never expose the motor to rain
or splashing water. Do not touch the motor with wet hands. Before
carrying out any work on the motor, you must shut down the main supply
circuit breaker of the system. Never intervene the cables while the motor
and its driver are energized.