1 5
Special Playback Modes
Repeat Playback
You can program the player to continuously repeat a single track or the entire disc.
The Repeat mode can be selected while the disc is playing or while the disc is
stopped.
Single Track Repeat
Select the track to be repeated and then press the
REPEAT
button on the front
panel once. The
REPEAT
indicator begins flashing.
If necessary, press the
PLAY/PAUSE
button to begin playback. The selected
track will be repeated continuously.
All Tracks Repeat
Press the
REPEAT
button on the front panel twice. The
REPEAT
indicator remains
‘On’.
If necessary, press the
PLAY/PAUSE
button to begin playback. The entire
disc will be repeated continuously.
To cancel Repeat playback press the
REPEAT
button on the front panel until the
REPEAT
indicator goes ‘Off’.
Repeat Playback mode may also be cancelled by pressing the
STOP
button,
switching to Radio function, or shutting the power ‘Off’.
Intro Scan Playback
This feature plays just the first 10 seconds of each track on the disc. This feature
is useful if you are looking for a particular song but you cannot remember the track
number or the song title.
1.) Load your disc as usual and wait until the display shows the total number of
tracks.
2.) Press the
INTRO
button. The Intro Indicator appears on
the display. The player will begin playing track “01”. After 10
seconds the player skips to track “02”, and so on, until it
has played the first 10 seconds of each track on the disc.
3.) When you hear the desired song press the
INTRO
button again to cancel the
Intro Scan playback mode and resume normal playback.
SB250A_011205.p65
12/1/2005, 17:25
15
