Emerson RXi HMI GFK-3233A, Инструкция по эксплуатации

Страница: 6 / 20

2 RXI Basic Quick Start Guide GFK-3233A
Connecting Your Device
The rear panel I/O port arrangement consists of the following:
RXi HMI Connectors
Figure 1: Rear Panel Arrangement
Step 1: Connect the Input Power
(24V DC-in)
To connect to power, follow these steps:
1. Verify that the power cable is not
energized.
2. Loosen the screw clamps on the
mating power connector.
3. Strip the insulation from the power
cables.
4. Secure the power cable to the mating
connector, noting polarity, and
tighten the screw clamps. The torque
for the attaching screws is 0.3 Nm (2.26 in-lb).