Emerson Rosemount 3144P, Справочное руководство

Страница: 214 / 236

Product Certifications
April 2017
Reference Manual
00809-0100-4021, Rev JA
Product Certifications
204
Markings: Explosionproof for Class I, Groups A, B, C,
D; Class II, Groups E, F, G; Class III;
[HART only zone markings]: Suitable for
Class I Zone 1 Group IIC; Intrinsically Safe
for Class I Groups A, B, C, D; Class II, Groups
E, F, G; Class III;
[HART only zone markings]: Suitable for
Class I Zone 0 Group IIC; T4(–50 °C
≤
T
a
≤
+60 °C); Type 4X; Suitable for Class I, Div. 2,
Groups A, B, C, D;
[HART only zone markings]: Suitable for
Class I Zone 2 Group IIC; T6(–60 °C
≤
T
a
≤
+60 °C); T5(–60 °C
≤
T
a
≤
+85 °C); when
installed per Rosemount drawing
03144-5076
B.4 Europe
E1 ATEX Flameproof
Certificate: FM12ATEX0065X
Standards: EN 60079-0: 2012, EN 60079-1: 2007, EN
60529:1991 +A1:2000
Markings: II 2 G Ex d IIC T6…T1 Gb,
T6(–50 °C
≤
T
a
≤
+40 °C),
T5…T1(–50 °C
≤
T
a
≤
+60 °C)
See Table B-1 at the end of the Product Certifications
section for Process Temperatures.
Special Conditions for Safe Use (X):
1. See certificate for ambient temperature range.
2. The non-metallic label may store an electrostatic
charge and become a source of ignition in Group III
environments.
3. Guard the LCD display cover against impact energies
greater than 4 joules.
4. Flameproof joints are not intended for repair.
5. A suitable certified Ex d or Ex tb enclosure is required to
be connected to temperature probes with Enclosure
option “N”.
6. Care shall be taken by the end user to ensure that the
external surface temperature on the equipment and
the neck of DIN Style Sensor probe does not exceed
130 °C.
7. Non-Standard Paint options may cause risk from
electrostatic discharge. Avoid installations that cause
electrostatic build-up on painted surfaces, and only
clean the painted surfaces with a damp cloth. If paint is
ordered through a special option code, contact the
manufacturer for more information.
I1 ATEX Intrinsic Safety
Certificate: BAS01ATEX1431X [HART];
Baseefa03ATEX0708X [Fieldbus]
Standards: EN 60079-0: 2012; EN 60079-11:2012
Markings:
HART: II 1 G Ex ia IIC T5/T6 Ga;
T6(-60 °C
≤
T
a
≤
+50 °C),
T5(-60 °C
≤
T
a
≤
+75 °C)
Fieldbus: II 1 G Ex ia IIC T4 Ga;
T4(-60 °C
≤
T
a
≤
+60 °C)
See Table B-2 at the end of the Product Certifications
section for Entity Parameters.
Special Conditions for Safe Use (X):
1. When fitted with the transient terminal options, the
equipment is not capable of passing the 500 V
insulation test. This must be taken into account during
installation.
2. The enclosure may be made from aluminum alloy with
a protective polyurethane paint finish; however, care
should be taken to protect it from impact or abrasion
when located in Zone 0.
N1 ATEX Type n
Certificate: BAS01ATEX3432X [HART];
Baseefa03ATEX0709X [Fieldbus]
Standards: EN 60079-0:2012, EN 60079-15:2010
Markings: HART:
II 3 G Ex nA IIC T5/T6 Gc;
T6(–40 °C
≤
T
a
≤
+50 °C),
T5(–40 °C
≤
T
a
≤
+75 °C)
Fieldbus: II 3 G Ex nA IIC T5 Gc;
T5(–40 °C
≤
T
a
≤
+75 °C)
Special Condition for Safe Use (X):
1. When fitted with the transient terminal options, the
equipment is not capable of withstanding the 500 V
electrical strength test as defined in clause 6.5.1 of EN
60079-15: 2010. This must be taken into account
during installation.
ND ATEX Dust
Certificate: FM12ATEX0065X
Standards: EN 60079-0: 2012, EN 60079-31: 2009, EN
60529:1991 +A1:2000
Markings: II 2 D Ex tb IIIC T130 °C Db,
(–40 °C
≤
T
a
≤
+70 °C); IP66
See Table B-1 at the end of the Product Certifications
section for Process Temperatures.