manualshive.com logo in svg

Emerson Rosemount 3095FB MultiVariable MODBUS, Быстрое руководство по установке

Поделиться
Скачать
Emerson Rosemount 3095FB MultiVariable MODBUS Скачать руководство пользователя страница 2

Quick Installation Guide

00825-0100-4738, Rev BA

October 2009

Rosemount 3095FB

2

©  2009 Rosemount Inc. All rights reserved. All marks property of owner. Rosemount and the Rosemount logotype are 
registered trademarks of Rosemount Inc. 

Rosemount Inc.

8200 Market Boulevard
Chanhassen, MN USA 55317
T (US) (800) 999-9307, F (952) 949-7001
T (Intnl) (952) 906-8888

Emerson Process Management GmbH & Co. OHG

Argelsrieder Feld 3
82234 Wessling
Germany
T 49 (8153) 9390, F49 (8153) 939172

Emerson Process Management Asia Pacific 
Private Limited

1 Pandan Crescent
Singapore 128461
T (65) 6777 8211, F (65) 6777 0947/(65) 6777 0743

Beijing Rosemount Far East Instrument Co., 
Limited

No. 6 North Street, 
Hepingli, Dong Cheng District
Beijing 100013, China
T (86) (10) 6428 2233, F (86) (10) 6422 8586

IMPORTANT NOTICE

This installation guide provides basic guidelines for the Rosemount 3095FB MultiVariable 
Transmitter with MODBUS Protocol (reference manual document number 
00809-0100-4738). It does not provide instructions for configuration, diagnostics, 
maintenance, service, or troubleshooting. Refer to the appropriate reference manual for 
more instruction. These manuals are also available electronically on 
www.rosemount.com.

WARNING

Explosions could result in death or serious injury:

 

Installation of this transmitter in an explosive environment must be in accordance with the 
appropriate local, national, and international standards, codes, and practices. 

• Before connecting communications in an explosive atmosphere, make sure the 

instruments in the loop are installed in accordance with intrinsically safe or 
non-incendive field wiring practices.

• In an Explosion-Proof/Flame-Proof installation, do not remove the transmitter covers 

when power is applied to the unit. 

Process leaks may cause harm or result in death.

• To avoid process leaks, only use the o-ring designed to seal with the corresponding 

flange adapter. 

Electrical shock can result in death or serious injury.

• Avoid contact with the leads and the terminals. High voltage that may be present on 

leads can cause electrical shock.

Содержание Rosemount 3095FB MultiVariable MODBUS



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды