manualshive.com logo in svg

Emerson Rosemount 2130, Справочное руководство

"Emerson Rosemount 2130" - это передовое устройство для измерения уровня жидкости и твердых веществ. Пользователи могут бесплатно скачать Руководство по эксплуатации с нашего веб-сайта. Получите детальную информацию о настройке и использовании этого продукта прямо здесь. {введите веб-сайт для скачивания}

Поделиться
Скачать
background image

Reference Manual

00809-0100-4130, Rev DC

Product Certifications

January 2019

54

Product Certifications

B.7  Safety Integrity Level (SIL) 

certification

The Rosemount 2130 is SIL2-certified. It has been independently 
certified to IEC 61508 as required by IEC 61511. Certification was 
conducted by Exida.

A detailed Failure Modes, Effects and Diagnostics Analysis (FMEDA) 
report for the Rosemount 2130 is available from Emerson. This 
report details all failure rates and failure modes as well as expected 
lifetime. The FMEDA report is available from the Document and 
Drawings tab on the 

Rosemount 2130 web page

. There are SIL 

documents including the FMEDA report, certificate, and Functional 
Safety Manual.

B.8  Canadian Registration Number

Certificate Number CRN 0F04227.2C

The requirements of CRN are met when a Rosemount 2130 
CSA-approved vibrating fork level switch (with Product 
Certification codes G6, E6, or I6) is configured with stainless steel 
wetted parts and either a NPT threaded or ASME B16.5 2-in. to 
8-in. flanged process connection.

B.9  Hazardous locations certifications

B.9.1  American and Canadian approvals

Factory Mutual (FM) explosion-proof approval

E5

  Project ID: 3012658

Explosion-proof for Class I, Div. 1, Groups A, B, C, and D
Temperature Class: T6
Enclosure: Type 4X
(See also 

Instructions specific to hazardous area installations 

(E5 and E6) 

).

Canadian Standards Association (CSA)
explosion-proof approval

E6

  Project ID: 1786345

Explosion-proof for Class I, Div. 1, Groups A, B, C, and D
Temperature Class: T6
Enclosure: Type 4X
Single Seal
See also 

Instructions specific to hazardous area installations 

(E5 and E6) 

.

Instructions specific to hazardous area installations (E5 and E6)

Model numbers covered: 
2130**9E***********E5***,2130**9E***********E6***
2130**9M***********E5***,2130**9M***********E6***
(“*” indicates options in construction, function and materials – see 

Table A-3 on page 40

)

The following instructions apply to equipment covered by CSA and 
FM explosion-proof approvals:

1. The equipment may be used with flammable gases and 

vapors with apparatus Class 1, Div 1, Groups A, B, C and D.

2. CSA and FM explosion-proof approved versions of the 

2130***E

 are certified for use in ambient temperatures of

–58 to 167 °F (–50 to 75 °C), and with a maximum process 
temperature of 500 °F (260 °C).
CSA and FM explosion-proof approved versions of the 

2130***M

 are certified for use in ambient temperatures of

–40 to 167 °F (–40 to 75 °C), and with a maximum process 
temperature of 356 °F (180 °C).

3. Installation of this equipment shall be carried out by suitably 

trained personnel, in accordance with the applicable code of 
practice.

4. Inspection and maintenance of this equipment shall be 

carried out by suitably trained personnel, in accordance with 
the applicable code of practice.

5. The user should not repair this equipment.

6. The certification of this equipment relies upon the following 

construction materials:

Body:

Aluminum alloy (ASTM B85 360.0) or 316 stainless steel

Cover:

Aluminum alloy (ASTM B85 360.0) or 316 stainless steel

Probe:

316 stainless steel, or alloy C276 (UNS N10276) and alloy C 
(UNS N10002)

Probe Filling: 

Perlite

Cover Seal: 

Silicone

7. If the equipment is likely to come into contact with 

aggressive substances, it is the responsibility of the user to 
take suitable precautions that prevent it from being 
adversely affected, thus ensuring that the type of protection 
is not compromised.
Aggressive Substances – e.g. acidic liquids or gases that may 
attack metals or solvents that may affect polymeric 
materials. 
Suitable Precautions – e.g. regular checks as part of routine 
inspections or establishing from the material’s data sheet 
that it is resistant to specific chemicals.
The metallic alloy used for the enclosure material may be at 
the accessible surface of this equipment; in the event of rare 
accidents, ignition sources due to impact and friction sparks 
could occur. This shall be considered when the Rosemount 
2130 is installed in locations that specifically require Class 1, 
Div 1 equipment.

8. It is the responsibility of the user to ensure:

a. The voltage and current limits for this equipment are 

not exceeded.

b. That the joint requirements between the probe 

(switch) and the vessel tank are compatible with the 
process media.

Содержание Rosemount 2130















































































Отзывы:

Нет отзывов

Похожие инструкции для Rosemount 2130

3M Charge Analyzer 711 Operating Instructions Manual preview
Charge Analyzer 711
Бренд: 3M Страницы: 24
Tactical Controls DTM Instruction Manual preview
DTM
Бренд: Tactical Controls Страницы: 11
FarmChem GRIZZLY Operation Manual preview
GRIZZLY
Бренд: FarmChem Страницы: 8
Lake Shore Cryotronics F71 User Manual preview
F71
Бренд: Lake Shore Cryotronics Страницы: 97
Flytec Element Track Quick Manual preview
Element Track
Бренд: Flytec Страницы: 2
Vaisala GroundCast DRS611 Setup Manual preview
GroundCast DRS611
Бренд: Vaisala Страницы: 12
YOSensi YO Meter Pulse User Manual preview
YO Meter Pulse
Бренд: YOSensi Страницы: 27
Keysight M3100A PXIe User Manual preview
M3100A PXIe
Бренд: Keysight Страницы: 92
Macnaught IM012E Instruction Manual preview
IM012E
Бренд: Macnaught Страницы: 8
IFM SDG 50 Series Operating Instructions Manual preview
SDG 50 Series
Бренд: IFM Страницы: 38
Neogen 9904A Quick Start Manual preview
9904A
Бренд: Neogen Страницы: 9
Victron energy BMV-710H Manual preview
BMV-710H
Бренд: Victron energy Страницы: 46
Tektronix P6460 Instructions Manual preview
P6460
Бренд: Tektronix Страницы: 20
Parker BD15 Series Installation And Service Manual preview
BD15 Series
Бренд: Parker Страницы: 16
Waterproof W1 5mm User Manual preview
W1 5mm
Бренд: Waterproof Страницы: 51
Omega DPG1001AD Instruction Sheet preview
DPG1001AD
Бренд: Omega Страницы: 4
Kawai Friendly Digital Piano Forte PV35 Owner'S Manual preview
Friendly Digital Piano Forte PV35
Бренд: Kawai Страницы: 102
Fairhaven Micro Alti Vario Plus Manual preview
Micro Alti Vario Plus
Бренд: Fairhaven Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды