16 – English – rM200
Pipe Guides
Pipe guides center the camera in the pipe,
improve picture quality, and help keep the
lens clear. Use pipe guides when possible
to reduce wear and tear on the camera sys-
tem.
Pipe guides can easily be installed, adjust-
ed, and removed to provide better camera
and push cable movement in the pipe. For
small pipes, tubes, or voids, the camera
head guide helps push the camera through
stubborn fittings. For larger pipes, ball
guides center the camera for better visibility
and light illumination.
Without Pipe Guide
With Pipe Guide
Camera Head Guide Installation
Camera head guides can be used in smaller
pipes to push the camera through stubborn
fittings.
1. Loosen the screws on both sides of
the guide until it slides easily onto the
camera head.
2. Tighten the screws until the guide
stays in place, but do not over-tighten.
