background image

9

Protect Your Furniture

This model is equipped with non-skid rubber 'feet' to prevent the product from

moving when you operate the controls. These 'feet' are made from non-migrating

rubber material specially formulated to avoid leaving any marks or stains on your

furniture. However certain types of oil based furniture polishes, wood preservatives,

or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a

rubber residue on the furniture. To prevent any damage to your furniture we strongly

recommend that you purchase small self-adhesive felt pads, available at hardware

stores and home improvement centers everywhere, and apply these pads to the

bottom of the rubber 'feet' before you place the product on fine wooden furniture.

Stereo Headphone Jack

This system includes a stereo 

PHONES

 jack on the front panel of the main unit.

You may connect a set of stereo headphones, not included, to this jack for private

listening without disturbing others.

The main speakers are automatically shut off when headphones are connected to

the 

PHONES

 jack. Make sure that the plug from your headphones is fully inserted

into the headphone jack. If the plug is not fully inserted the sound may be intermittent,

or you may only hear sound from one side of the headphones.

IMPORTANT

: To prevent hearing damage always set the volume control to a

low level before you connect the headphones. Then connect the headphones,

put them on, and very gradually increase the volume to a comfortable listening

level. Remember that CDs may contain both very soft and very loud passages.

Adjust the volume to a comfortable level using a louder passage, so that you

always know what the maximum level will be.

ES299_062905.p65

29/6/2005, 15:07

9

Содержание Research ES299

















































Отзывы: