Emerson PMAC II Solo, Инструкция по установке и эксплуатации

Страница: 18 / 22

Programming the UC12PG-R Controller on the PMAC II Solo Panel Overview • 12
9. From the Status View screen, press the
button to move the cursor to 4. VIEW MIN
DEWPOINT and press the button to se-
lect and view.
This screen displays the minimum dewpoint setpoint.
10. Press the or button to go back to the
Status View screen.
11. From the Status View screen, press the
button to move the cursor to 5. VIEW MAX
DEWPOINT and press the button to se-
lect and view.
This screen displays the maximum dewpoint setpoint.
12. Press the or button to go back to the
Status View screen.
13. From the Status View screen, press the
button to move the cursor to 6. VIEW MIN
PULSE % and press the button to select
and view.
This screen displays the minimum pulse rate generated
at the minimum dewpoint setpoint.
14. Press the or button to go back to the
Status View screen.
15. From the Status View screen, press the
button to move the cursor to 7. VIEW MAX
PULSE % and press the button to select
and view.
This screen displays the maximum pulse rate generated
at the maximum dewpoint setpoint.
16. Press the or button to go back to the
Status View screen.
17. From the Status View screen, press the
button to move the cursor to 8. VIEW LOAD
SHED and press the button to select and
view.
This screen displays the state of the load shed input.
The load shed input is active on a closure and inactive when
open.
18. Press the or button to go back to the
Status View screen.
19. From the Status View screen, press the
button to move the cursor to

9. V IEW LOAD SHED % . Press the
button to select and view.
Figure 1-44 - Minimum Dewpoint Status Screen
Figure 1-45 - Maximum Dewpoint Status Screen
Figure 1-46 - Minimum Pulse Rate Status Screen
MIN DEW POINT
16F
MAX DEW POINT
80F
MIN PULSE RATE
10%
Figure 1-47 - Minimum Pulse Rate Status Screen
Figure 1-48 - Load Shed Status Screen
MAX PULSE RATE
100%
LOAD SHED STATUS
INACTIVE [X]