9
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1.) Move the
FUNCTION
selector to the
RADIO
position.
2.) Move the
BAND
selector to the desired band,
FM ST
,
FM
or
AM
.
3.) Tune to your desired station with the
TUNING
control. If you have set the
BAND
selector to
FM ST
and you tune to a FM Stereo station the
FM ST.
LED Indicator
will light.
4.) Adjust the
/ –
controls to the desired level.
5.) When you are finished listening move the
FUNCTION
selector back to the
OFF/TAPE
position to shut the power ‘Off’ and extend the battery life.
Antenna Information
AM
The AM antenna is inside the
cabinet. I F AM receptio n is
unsatisfactory try rotating the
entire unit until you find the position
that provides the best reception.
FM
Vary the direction of the FM antenna to find
the position that provides the best reception.
NOTE:
If you are listening to a weak FM Stereo station you can usually improve
the reception by moving the
BAND
selector from the
FM ST
position to the
FM
position, however the sound will now be mono.
PD6922_B111003.p65
10/11/2003, 11:12
9