8
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1.) Move the
FUNCTION
selector to the
RADIO
position.
2.) Move the
BAND
selector to the desired band,
FM ST
,
FM
or
AM
.
3.) Tune to your desired station with the
TUNING
control. If you have set the
BAND
selector to
FM ST.
(Stereo) and you tune to a FM Stereo station the
FM STEREO
LED Indicator will light.
4.) Set the Volume control to the desired level.
5.) When you are finished listening move the
FUNCTION
selector back to the
TAPE (RADIO OFF)
position to shut the power ‘Off’ and extend the battery life.
Antenna Information
AM
The AM antenna is inside the
cabinet. IF AM reception is
unsatisfactory try rotating the
entire unit until you find the
position that provides the best
reception.
FM
Vary the direction of the FM antenna to find
the position that provides the best reception.
NOTE:
If you are listening to a weak FM Stereo station you can usually improve
the reception by moving the
BAND
selector from the
FM ST
position to the
FM
position, however the sound will now be mono.
PD6513_D120403.p65
4/12/2003, 16:17
8
