OPERATION PROCEDURE
This Section Includes Useful Information About Oven Operation
1. Plug the power supply cord into a standard 3-pronged 20 Amp, 120V AC, 60 Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass
tray. The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
2
3
4
5
6
7
8
When the oven door is opened, the light turns off. This is
standard procedure for the oven. There are no microwaves
being produced when the door is open.
The oven door can be opened at any time during operation by
pressing the Door Release button on the control panel. The
oven will automatically shut off. To restart the oven, close the
door and then press the START pad.
Each time a pad is touched, a beep will sound to acknowledge
the touch (except Child Lock feature). One of the function
pads must be touched before the number pads. Therefore, no
beep will sound if a number pad is touched before the function
pad.
The oven automatically cooks on high power (PL 10) unless
set to a lower power level.
The display will flash “0:00” when the oven is first plugged in.
The display shows “End” when the oven turns off. To return to
the time of day, touch the CLEAR/PAUSE pad or open the
oven door.
When the CLEAR/PAUSE pad is touched during oven
operation, the oven stops operating and all information is
retained. To erase all information (except the present time and
memory data), touch the CLEAR/PAUSE pad once more. If
the oven door is opened during operation, all information is
retained.
If the START pad is touched and the oven does not operate,
check the area between the door and the door seal for
obstructions and make sure the door is closed securely. The
oven will not start cooking until the door is completely closed
or the program has been reset. Make sure the Child Lock
feature is not turned on.
CHILD LOCK
This safety feature prevents unwanted or unauthorized
use by small children or other people.
1.
To lock the oven, touch the number pad “0” once
and then press the START pad five times. The
display will show “L OC” and the oven will not
operate.
2.
To unlock the oven, repeat the above procedure.
The oven display will return to the present time.
BEEP TONE
When a correct pad is touched, a beep tone (0.2 seconds
long) will be heard (except with Child Lock feature). If a
pad is touched and no beep tone is heard, the unit has
not, or cannot accept the instruction(s).
At the end of the last cook cycle, the oven beeps 5 times,
turns off automatically and “End” appears in the display
window.
DOOR RELEASE
Opening the door during cooking will stop any cooking
process without cancelling any program. Cooking
resumes as soon as the door is closed and the START
pad is touched.
TO CORRECT ANY IMPROPER PROGRAM
ENTRIES
A)
Touch the CLEAR/PAUSE pad.
B)
Repeat the desired program entry from the
beginning.
C)
Any erroneous entries will cause the display to
show “Err” (error) when the START pad is touched.
9
10
11
12
7
Make sure the oven is properly installed and plugged
into the electrical outlet.
