manualshive.com logo in svg

Emerson MS3106, Руководство пользователя

Поделиться
Скачать
Emerson MS3106 Скачать руководство пользователя страница 19

1 8

5.) Tune to the next station to be memorized, press the 

TIME-SET/MEMORY

button, press the 

PRESET UP/RANDOM

 button to select Preset (Channel)

number “02”, and press the 

TIME SET/MEMORY

 button again.

6.) Repeat Step 5, selecting a different Preset (Channel) number each time, until

you have entered up to 20 stations on one band, then press the 

TUNER/

BAND

 button to select the other band and follow the same procedure to preset

up to 20 stations on that band.

NOTE

:

You may also select the Preset (Channel) numbers directly by pressing the

appropriate number buttons on the remote control while the 

MEMORY

 indicator is

flashing.

 • To select Preset (Channel) numbers 1 through 9, press the corresponding number

buttons.

 • To select Preset (Channel) numbers 11 through 19, press the “

+10

” button first

and then appropriate number button.

 • To select Preset (Channel) number 20, press the “

+10

” button twice, then press

the “

0

” button.

MS3106_010804.p65

8/1/2004, 11:40

18

Содержание MS3106








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды