manualshive.com logo in svg

Emerson MS3106, Руководство пользователя

Поделиться
Скачать
Emerson MS3106 Скачать руководство пользователя страница 13

1 2

OPERATING INSTRUCTIONS

TURNING THE SYSTEM ‘ON’

Plug the unit into the 120V 60Hz AC outlet.

At the front of the unit, the light within the 

POWER/STANDBY

 button 

 will be red

to indicate that the unit is in standby (standby means plugged-in but not switched

on).

Main LCD display lights up and automatically shows self-demonstration mode if,

 • Clock is not set.

 • The unit is plugged in AC power the first time, or

 • The AC power has been interrupted.

The display lighted colors change in sequence:

Switch the unit on by pressing the 

POWER/STANDBY

 

 button on the front panel

or the remote control. The display self-demonstration mode stops.

The unit is now ready to use.

COLOR Button

You may turn the color-changing feature “On” or “Off” by pressing the 

COLOR

Button on front panel or remote control.

(To switch the unit back to standby, simply press 

 button again.)

COLOR

MS3106_010804.p65

8/1/2004, 11:39

12

Содержание MS3106








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды