background image

7

emersonfans.com

Please contact 1-800-654-3545 for further assistance

ETL Model No.: LK180LED/LK150LED

FAN SPEED 
CONTROL CHAIN

GLASS BOWL

LED LIGHT FIXTURE 
ASSEMBLY CHAIN

Figure 9

3.10

Depending on the fan model, insert the fan speed
control switch chain through the offset hole in the glass
bowl (Figure 9).

Insert the LED light fixture assembly chain through the
center hole in the glass bowl (Figure 9).

Gently place the glass bowl onto the LED light fixture
assembly (Figure 9). 

NOTE: It is critical that the fan chain(s) are aligned with
hole(s) in the glass bowl for smooth operation of the fan
switch(es).

3.11

Secure the glass by installing the rubber washer and the
hex nut finger tight (Figure 10).

NOTE: The bowl cap comes with three options: no holes,
one hole and two holes for pull chain options.

NOTE: The finial nut comes with two options: no holes
and one hole for pull chain options.

Then place the bowl cap onto the threaded stud of the
LED light fixture assembly, route the fan speed control
chain through the offset hole and the LED light fixture
assembly chain through the center hole (Figure 10).
Install and tighten the threaded finial nut onto the
threaded stud of the LED light fixture assembly
(Figure 10).

NOTE: It is advisable to periodically check the tightness
of the finial nut.

NOTE: It is critical that the fan chain(s) are aligned with
hole(s) in the glass bowl and bowl cap for smooth
operation of the fan switch(es).

FAN SPEED 
CONTROL CHAIN

GLASS BOWL

THREADED STUD

RUBBER WASHER

HEX NUT

BOWL CAP

FINIAL NUT

LED LIGHT FIXTURE 
ASSEMBLY CHAIN

Figure 10

COUPLING

WOOD PENDANT

LED LIGHT FIXTURE 
ASSEMBLY CHAIN

WOOD PENDANT

FAN SPEED 
CONTROL CHAIN

COUPLING

GLASS 
BOWL

Figure 11

3. Installation on Emerson Fans Having a

Modular Switch Cup with Center Screw

(Continued)

3.12

Connect the wood pendant (supplied) to the switch pull
chain by sliding the wood pendant (small hole first) onto
the pull chain (Figure 11).

Attach the chain coupling to the end of the chain and
allow the wood pendant to fall down over the
coupling (Figure 11).

BP7503 LK150 LK180  10/13/15  3:56 AM  Page 7

Содержание LK150LED













Отзывы: