Emerson Liebert PPC 15-30 kVA, Технические данные инструкция

Страница: 6 / 24

Liebert Packaged Power System Advantages Compared to Conventional, Built-Up Systems
2
L
IEBERT
P
ACKAGED
P
OWER
S
YSTEM
A
DVANTAGES
C
OMPARED TO
C
ONVENTIONAL
,
B
UILT
-U
P
S
YSTEMS
Desirable Features Conventional Built-Up Systems Liebert Packaged Power System
Proven System
Design
No . Each site is a one-of-a-kind installation.
“Design” depends on engineer and installer.
Yes . Liebert power systems are complete,
proven-design, factory tested to ensure
consistent performance. Designed-in
distribution flexibility accommodates all
installation sites.
Agency Approved
Not as a system . Even though listed
components may be used, site-fabricated
distribution is subject to acceptance by local
inspecting authorities.
Yes . UL listing as a complete system is an
assurance of safety.
Factory Tested
No . Testing of performance is done at the site,
if at all.
Yes . Factory testing the complete system
ensures performance and safety of the system.
Power Quality
Improvement
Doubtful . Because of the variables in design
and installation, site-fabricated distribution
does not consistently offer computer-grade
power isolation or ground systems.
Yes . Because packaged power systems have
shielded isolation transformers close to the
load, they offer power line noise attenuation
and controlled grounding.
Computer-Grade
Grounding
Difficult . Since site-fabricated distribution
seldom includes an isolation transformer in the
computer room, a local single point ground
system that minimizes common mode
disturbances is difficult to establish.
Yes . The packaged power system with
isolation transformer automatically establishes
a local single-point ground for the critical load.
The power grounding point is the same as the
computer system grounding point, minimizing
common mode disturbances.
Secure Distribution
Possibly . Only if the entire distribution panel is
dedicated to the computer and the panel is in
the computer room.
Yes . Power distribution panel is in the
computer room. Access is limited to authorized
personnel.
Circuit Identification
Possibly . Circuit number and receptacle
references might be supplied, depending on
the installing electrician and available
information.
Yes . Identification tags adjacent to each circuit
breaker provide circuit identification and
description of load served. Each cable is
tagged with circuit number and cable length.
Monitoring
Seldom . Some add-on monitoring systems are
available, but monitoring also depends on the
installing electrician and available information.
Yes . Built-in power parameter monitoring,
alarm, and control capabilities are standard in
packaged power systems.
Ease of Installation
No . All site-fabricated distribution wiring
becomes part of premises wiring.
Yes . A packaged system requires only a single
connection to the premises wiring.
Easy System
Expansion
No . Conduit installation and wire pulling is time-
consuming, and can hamper operations while
in progress.
Yes . New cable(s) can be routed quickly with
minimal disruption.
Easy System
Rearrangement
No . Site-fabricated distribution cannot be easily
rearranged. Old conduit and wiring must be
removed and new installed.
Yes . Even after major equipment
rearrangement, redistributing power from
packaged systems becomes a simple matter of
re-routing the flexible interconnecting cables.
Easy To Move
No . New distribution must be built at the new
site and old conduit and wiring usually must be
removed from the former site.
Yes . The package is easily moved with the
computer system to the new site.