18
U.L. Model No.: CF205
6. Ceiling Cover Installation
THREADED STUDS (2)
HANGER BRACKET
Figure 27
6.1
Screw the 1-1/4” threaded studs into the threaded holes
on the bottom of the hanger bracket with your fingers
(Figure 27).
6.2
Lift the ceiling cover up to the threaded studs and turn until
studs protrude through the holes in the ceiling cover
(Figure 28).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied in parts bag). (Figure 28).
Tighten the knurled knobs securely until the ceiling cover
fits snugly against the ceiling and the hole in the ceiling
cover is clear of the downrod.
THREADED
STUD (2)
CEILING
COVER
KNURLED
KNOB (2)
LOCKWASHER (2)
Figure 28
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and not
pinched between the ceiling cover and the ceiling.
WARNING
!
To avoid possible fire or shock, make sure that antenna
wire is not pinched between the ceiling cover and the
ceiling.
WARNING
!
