Quick Start Guide
D103470X012
DLC3020f Digital Level Controller
April 2022
2
Installation
WARNING
To avoid personal injury or property damage, always wear protective gloves, clothing, and eyewear when performing any
installation operations.
Personal injury or property damage due to sudden release of pressure, contact with hazardous fluid, fire, or explosion can
be caused by puncturing, heating, or repairing a displacer that is retaining process pressure or fluid. This danger may not
be readily apparent when disassembling the sensor or removing the displacer. Before disassembling the sensor or
removing the displacer, observe the appropriate warnings provided in the sensor instruction manual.
Check with your process or safety engineer for any additional measures that must be taken to protect against process
media.
Refer to figure 1 for the installation flow chart.
Do not install, operate, or maintain a DLC3020f digital level controller without being fully trained and
qualified in field instrument and accessory installation, operation, and maintenance
. To avoid personal
injury or property damage, it is important to carefully read, understand, and follow all of the contents
of this manual, including all safety cautions and warnings.
Refer to the appropriate supplement listed
below for hazardous area approvals and special instructions for “safe use” and installations in
hazardous locations. If you have any questions regarding these instructions contact your
before proceeding.
D
CSA Hazardous Area Approvals - DLC3020f Digital Level Controller (D104408X012)
D
FM Hazardous Area Approvals - DLC3020f Digital Level Controller (D104409X012)
D
ATEX Hazardous Area Approvals - DLC3020f Digital Level Controller (D104410X012)
D
IECEx Hazardous Area Approvals - DLC3020f Digital Level Controller (D104411X012)
All documents are available from your Emerson sales office or at Fisher.com. Contact your Emerson sales office for all
other approval/certification information.
