Emerson FA-700, Инструкция по установке и эксплуатации

Страница: 10 / 20

Important
Connecting the FA-700 and another device to the same phone jack
If you need to connect the FA-700 and some other device, such as a telephone, to the same
wall phone jack, simply use a phone jack splitter
(not provided). To use a splitter, do the
following:
Step Action
1. Plug the line splitter into the wall jack as shown in Figure 5.
2. Plug one phone cord into one jack on the line splitter, as shown in Figure 5.
3. Plug the second phone cord into the other jack on the line splitter.
4. Plug the other end of the one phone cord into the FA-700.
5. Plug the other end of the remaining phone cord into the phone or other device.
Figure 5: Phone Line Splitter
Note: Both units will operate from the same jack independently without cross interference.
Line Splitters can be purchased at most hardware and electronic stores.
Phone services and your FA-700
DSL and other digital phone services
Please note that the FA-700 is designed and certified by the FCC to operate on a standard
telephone line, provided by your local telephone company, Cable, or Digital phone
service. DSL may work with the appropriate in-line filters. If you have questions or
problems using one of those types of phone services, contact that specific phone service
provider for assistance.
Note: The FA-700 dials out using touch tone dialing only.
During power failures, many alternative phone services such as DSL, Digital and Cable
provided phone service DO NOT WORK. Those phone services require that power be on at the
location for the phone to operate. The FA-700 will NOT be able to call out if the power is out
when using these phone services. If you have a standard telephone line, power is supplied to this
line by the telephone company and is usually not affected when power goes out at the monitored
location.
Line Splitter
(not provided)
Phone Cord
Wa
ll P
ho
ne
Ja
ck
Phone Cord