2000 and 2500 Series
6
Figure 8.
Enardo 2000 Smart Wireless Monitoring Option
Installation
!
WARNING
The EPRV Series is shipped with its lid
held partially open. The lid assembly has
attached weights and is heavy. Use caution
when removing the shipping blocks and
metal bands to avoid injury to fingers
and hands.
Before installing the relief vent, remove the unit from
its crate and discard any protective coverings. Follow
the instruction below for the installation of the 2000 and
2500 Series.
1.
Install the 2000 and 2500 Series on the flange
bolt patterns that match with bolt pattern of the
vent. The attachment flange base should be at
level surface.
2. Carefully remove the 2000 and 2500 Series from
its crate. The seal portion of the vents is delicate,
protect this surface while handling the unit.
3. Place the appropriate gasket on the level attachment
flange and center the vent into place.
4. Insert the appropriate number of bolts and make sure
the vent is fastened securely. Installed bolts should
be clear of the lid assembly when it is in the full
open position.
5. Inspect the installed unit from items that would keep
it from working properly. The sealing area should be
free of any debris that would cause leakage. The arm
of the vent should be able to fully open.
CONDUIT
BRACKET
TRANSMITTER
SENSOR
MAGNETIC TARGET
WIRELESS EAR
