background image

2000 and 2500 Series

2

Specifications

The Specifications section lists the specifications for the 2000 and 2500 Series. Specification is stamped on the 

nameplate attached to the emergency relief vent. Refer to Product Identification and Marking section for the 

nameplate details.

Connection Sizes Available

  See Table 1

Pressure Ranges

(1)(2)

2000 Series:

2.0 to 32.0 oz./sq. in.  

(0.5 oz./sq. in. increments)  

3.5 to 55.0 in. w.c. 

(1.0 in. w.c. increments) 

8.6 to 138 mbar 

(2.2 mbar increments)

2500 Series:

4.0. to 16.0 oz./sq. in.  

(0.5 oz./sq. in. increments) 

7.0 to 27.0 in. w.c. 

(0.5 in. w.c. increments) 

17.4 to 67.2 mbar 

(2.2 mbar increments)

Vacuum Pressure Ranges

(1)

 (2500 Series)

0.5, 0.75, 1 and 2 oz./sq. in.

Construction Materials

2000 Series

Base and Arm:

 Carbon Steel, 304 Stainless steel 

and 316 Stainless steel

Disk and Seal Support:

 Aluminum,  

304 Stainless steel and 316 Stainless steel

Seal:

 Buna-N, FEP Teflon

®

 and Viton

®

2500 Series

Base, Arm and Hood:

 Carbon steel,  

304 Stainless steel and 316 Stainless steel

Disk and Seal Support

: Aluminum and 

316 Stainless steel 

Seal:

 FEP Teflon

®

, Viton

®

 and Buna-N

Vacuum Spring:

 302 Stainless steel

Vacuum Pallet and Vacuum Seat:

 Polyphenylene 

Sulfide and 316 Stainless steel

1. The pressure limits in this Instruction Manual and any applicable standard or code limitation should not be exceeded.

Figure 4. 

Product Identification and Marking

Teflon

®

 and Viton

®

 are marks owned by E. I. du Pont de Nemours and Company.

SERIES

MODEL

CONNECTION SIZE

ANSI

API

2000 Series

Emergency Pressure Relief -  

For Pressure Relief Only

2004

4 in.

- - - -

2008

8 in.

8 in.

2012

12 in.

- - - -

2016

16 in.

- - - -

2018

18 in.

- - - -

2020

20 in.

20 in.

2024

24 in.

24 in.

2500 Series

Emergency Pressure Relief Vent  

with Vacuum -

For Pressure and Vacuum Relief

2516

16 in.

- - - - 

2520

20 in.

20 in.

2524

24 in.

24 in.

Table 1. 

Connection sizes and Model Number

HAZARDOUS LOCATION

OUTER HOUSING OF UNCOATED ALUMINUM 

II 2 G c T6

OUTER HOUSING OF STAINLESS STEEL, 

CARBON STEEL OR COATED ALUMINUM 

II 1 G c T6

SMART WIRELESS ID MARKING 

(2000 SERIES MODELS ONLY)

  II 1 G c T5

Ex ia IIC T5 Ga

Содержание Enardo 2000 Series









Отзывы: