XRB60CHC EN r1.1 2018.11.01.docx
XRB60CHC
7/7
it is possible to suffer continuous interruption at the communication channel. When discovered, a pairing
secure code will be required for connection. Please follow the APP instruction for more information.
20.1
FIRST INSTALLATION
After connecting and powering-up the controller, it will be possible to manage it by using the Emerson mobile
APP. Il will be required to:
-
Install the Emerson mobile APP on your mobile device (smartphone or tablet)
-
Create a new user account (email and password for accessing to the APP)
The owner is the only account that is able to:
-
Manage the controller via Bluetooth
-
Extend right of access to a particular appliance to other users
A Cloud portal has to be used for:
-
Extend right of access to a particular appliance to other users
-
Select the permission level for any new user
The link for opening the Cloud webpage is on the left side menu of the mobile APP (slide right the screen of
the APP when on the
scan page and follow the “Cloud management” link. Please note that the login and
password for the Cloud webpage is the same of the ones used for the mobile APP.
20.2
RESETTING AN APPLIANCE
In case you need to reset an installation, please follow this operations:
-
Access to the Cloud webpage and select the appliance you want to reset (search for name and
MAC-ADDRESS)
-
Click on the
“DELETE” link, the appliance will be removed from the list of owned appliances
-
Go to the device controller (with the same MAC-ADDRESS)
-
Enter the programming mode
-
Go to the “BLE” menu
-
Select the par. rPS (reset device ownership)
-
Select “Y” and confirm with
SET button
-
Exit from the programming menu
-
Logout and login from the mobile APP
Doing this, the controller will be reset to factory default configuration and it will be ready for a new association
(means a new Owner)
The XRB60CHC is compliant with the following standards:
ETSI EN 300 328 V2.1.1 (2016-11)
IEC EN 60730-2-9: 2008 (Third Edition) and Am.1:2011 in conjunction with IEC 60730-1:2010 (Fourth Edition)
UL 60730-1 Fourth Edition and CAN/CSA-E60730-1:02 Third Edition along with its Amendment 1 dated
February 2007, the Standards for Automatic electrical controls for household and similar use
–
Part 1: General
requirements.
Hereby, Dixell S.r.l. declares that the radio equipment type XRB60CHC is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
EmersonClimate.com/Dixell
It therefore meets the essential requirements of the following Directives:
Radio equipment Directive 2014/53/EU
Electromagnetic compatibility 2014/30/EU
Low Voltage equipment 2014/35/EU
The XRB60CHC is compliant with the following standards:
FCC 15.247
The XRB60CHC is compliant to Part 15 of the FCC Rules:
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.”
This device has been designed and complies with the safety requirements for portable (<20cm) RF exposure
in accordance with FCC rule part 2.1093 and KDB 447498 D01 as demonstrated in the RF exposure analysis.
Installers must ensure that this device must not be co-located or operated in conjunction with any other
antenna or transmitter except in accordance with FCC multi-transmitter product procedures.
Unauthorized repairs, changes or modifications could result in permanent damage to the equipment and void
your warranty and your authority to operate this device under Part 15 of the FCC Rules.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.
The XRB60CHC is compliant to RSS 102
Cet XRB60CHC instrument répond aux normes RSS 102
The Dixell XRB60CHC complies with the safety requirements for RF exposure in accordance with RSS-102
Issue 5 for portable
use conditions
This device complies with ISED’s license
-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device
This device complies with the safety requirements for RF exposure in accordance with RSS-102 Issue 5 for
portable use conditions.
Dixell 01XRCHC est conforme aux
exigences de sécurité pour l’exposition RF conformément
aux CNR
d’Industrie Canada applicables aux appareils radio RSS
-210 5e edition.
Le présent appareil est conforme aux
RSS exempts de licence d’ISDE. Le fonctionnement de l'appareil est
sujet aux deux conditions suivantes:
(1) Ce dispositif ne doit pas produire de brouillage préjudiciable, et
(2) Ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
Le présent appareil est conforme aux limites d’exposition aux RF conformément au norme CNR
-102 émission
5 pour conditions d’utilisation portable
.
