Emerson Dixell XR70T, Инструкции по установке и эксплуатации

Страница: 25 / 40

1592040000 XR70T EN v1.1 2019.07.09 XR70T 25/40
Prb P4P Probe P4 presence no Pr1 n(0); Y(1)
Prb o4 Probe P4 calibration 0 Pr1 °F
[-12.0°C to 12.0°C]
[-21.6°F to 21.6°F]
diS CF
Temperature measurement unit:
Celsius; Fahrenheit
°F Pr1 °C(0); °F(1)
diS rES
Temperature resolution: decimal,
integer
dE Pr1 dE(0); in(1)
diS Lod Probe default displayed P1 Pr1
P1(0); P2(1); P3(2);
P4(3); SEt(4); dtr(5)
diS rEd Remote probe displayed (for XH-REP) P2 Pr1
P1(0); P2(1); P3(2);
P4(3); SEt(4); dtr(5)
diS dLy
Temperature display delay (resolution
10 sec)
00:00 Pr1
mm:s
s
0.0 to 20min00sec
diS dtr
Probe visualization
percentage=F(P1;P2) (dtr=1 means
VALUE=0.01*P1+0.99*P2) 99 Pr1 1 to 99
dEF EdF Defrost mode rtC Pr2 rtC(0); in(1)
dEF tdF Defrost type: electric heating, hot gas EL Pr2 EL(0); in(1)
dEF dFP Probe selection for defrost control P2 Pr2 nP(0); P1(1); P2(2); P3(3); P4(4)
dEF dtE End defrost temperature 48.0 Pr2 °F
[-50.0°C to 50.0°C]
[-58.0°F to 122.0°F]
dEF idF
Interval between two successive defrost
cycles
24 Pr2 ora 0 to 255 hours
dEF MdF Maximum length of defrost cycle 20 Pr2 min 0 to 255 min
dEF dSd Start defrost delay 0 Pr2 sec 0 to 255 sec
dEF StC
Compressor stop before starting any
defrost
0 Pr2 sec 0 to 255 sec
dEF dFd Displaying during defrost dEF Pr2
rt(0); it(1); SEt(2); dEF(3);
Coo(4)
dEF dAd
Temperature display delay after any
defrost cycle
0 Pr2 min 0 to 255 min
dEF Fdt Draining time 1 Pr2 min 0 to 255 min
dEF Hon
Drain heater enabled after draining time
(par. Fdt)
2 Pr2 min 0 to 255 min
dEF dPo Defrost cycle enebled at stat-up no Pr2 n(0); Y(1)
dEF od1
Automatic defrost (at the beginning of
any energy saving mode)
no Pr2 n(0); Y(1)
FAn FAP Probe selection for evaporator fan P2 Pr2 nP(0); P1(1); P2(2); P3(3); P4(4)
FAn FSt Evaporator fan stop temperature 50.0 Pr2 °F
[-50.0°C to 50.0°C]
[-58.0°F to 122.0°F]
FAn HYF Evaporator fan regulator differential 4.0 Pr2 °F
[0.1°C to 25.0 °C]
[0.1°F to 45.0°F]
FAn FnC Evaporator fan operating mode C-n Pr2 C-n(0); O-n(1); C-Y(2); O-Y(3)
FAn Fnd Evaporator fan delay after defrost cycle 1 Pr2 min 0 to 255 min
FAn FCt
Differential temperature for cyclic
activation of evaporator fans
(o=disabled) 0 Pr2 °F
[0°C to 50°C]
[0°F to 90°F]
FAn FSU Evaporator fan operating mode Std Pr2 Std(0); FoF(1); Fon(2)
FAn Ft Evaporator fan controlled during defrost no Pr2 n(0); Y(1)
FAn Fon
Evaporator fan ON time in normal mode
(with compressor OFF)
5 Pr2 min 0 to 255 min
FAn FoF
Evaporator fan OFF time in normal
mode (with compressor OFF)
10 Pr2 min 0 to 255 min
FAn Fo1
Evaporator fan ON time in energy
saving mode (with compressor OFF)
5 Pr2 min 0 to 255 min
FAn FF1
Evaporator fan OFF time in energy
saving mode (with compressor OFF)
10 Pr2 min 0 to 255 min
FAn Fd1 Evaporator fan delay 0 Pr2 sec 0 to 255 sec