Emerson Dixell XR70T, Инструкции по установке и эксплуатации

Страница: 11 / 40

1592040000 XR70T EN v1.1 2019.07.09 XR70T 11/40
4.7 SETPOINT MENU
When in
Programming Menu , it is possible to enter the Setpoint Menu by touching the SET icon for 3 sec.
Both SET and PRG icons will blink until the Setpoint Menu is unlocked. Both PROG LEVEL icons start
toggling to indicate that the visualized value is editable. Press the BACK icon to exit (come back to the
Programming Menu ) without saving.
4.8 HOTKEY
– UPLOAD
When in
Programming Menu , it is possible to activate the HotKey Upload Menu function to save the
current device configuration (parameter values) into the external memory. To do this, follow these
instructions:
1. H-swipe to go on the UPL screen
2. Insert the HotKey (on the 5-pin ports on the back of the device)
3. Touch the
PRG icon for 3 sec
4. The copying procedure will start and the PRG icon will blink during the copy operations
5. At the end of the copying procedure, a message will notify the user that the operation has been
competed successfully:
a. End : all parameters have been copied
b. Err : some error occours during copying operations
4.9 HOTKEY
– DOWNLOAD
When in
Power-off or in Stand-by mode, it is possible to activate the HotKey Download Menu function to
copy a new configuration (parameter values) into the current device memory. To do this, follow these
instructions:
1. Insert the HotKey (on the 5-pin ports on the back of the device)
2. Touch the
OFF icon for 3 sec
3. After power-on, the copying procedure will start automatically and the PRG icon will blink during the
copy operations
4. At the end of the copying procedure, a message will notify the user that the operation has been
competed successfully:
a. End : all parameters have been copied
b. Err : some error occours during copying operations