Emerson Copeland Scroll SZO22 Скачать руководство пользователя страница 7

Страница: 7 / 34

Single-Compressor Module

Important Safety Information

2008SSD-34 (5/11)

Single-Compressor Module

Compressor Module Nomenclature

2008SSD-34 (5/11)

mportaNt

afety

NformatioN

This manual contains important instructions for installation, operation and maintenance of your Copeland

Scroll

Compressor Module.

WARNING

The Compressor Module must be installed ONLY in systems that have been designed by

qualified engineering personnel. The system must conform to all applicable local and national

regulations and safety standards.
These instructions are intended to assist in the installation and operation of the Compressor

Module and MUST be kept with the Compressor.

Service and maintenance of the Compressor Module must be performed by qualified technicians

only. Service and maintenance must conform to all applicable local and national regulations and

safety standards.
Thoroughly review this manual, all instructions and hazard warnings before performing any work

on the Compressor Module.
Maintain all Compressor Module operation and hazard warning labels.

WARNING

Flammable gas can form explosive mixtures with air. Explosive gases can cause property

damage, serious personal injury or death.

WARNING

Failure to disconnect and lockout electrical power from the Compressor Module before attempting

maintenance can cause shock, burns, severe personal injury or death.

WARNING

Loosening or removing pressure-containing components from the Compressor Module when it is

in operation can cause major property damage, serious personal injury or death.
Failure to relieve system pressure prior to performing service or maintenance on the Compressor

Module can cause property damage or serious personal injury.

CAUTION

Extreme heat can cause personal injury or property damage.

CAUTION

Always use a lifting device capable of supporting the full weight of the Compressor Module or

component being lifted.
Handling or lifting heavy assemblies can cause personal injury or property damage.

Содержание Copeland Scroll SZO22



































Результаты поиска

Содержание Copeland Scroll SZO22

Отзывы:

Похожие инструкции для Copeland Scroll SZO22

Бренды по названию

Популярные бренды

Emerson Copeland Scroll SZO22, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание Copeland Scroll SZO22

Отзывы:

Похожие инструкции для Copeland Scroll SZO22

Бренды по названию

Популярные бренды