PIP-ControlWaveLS
Page -
11
Vibration: 1g for 10-500 Hz on any axis per SAMA PMC-31-1 without
damage or impairment.
.5g for 150-2000Hz
RFI Susceptibility:
10V/meter – 80MHz to 1000MHz
3.3 CONNECTORS
3.3.1 Terminal Block TB1
3-Pin Terminal Block TB1 accommodates input power from the bulk DC source. TB1 could
act as a power pass-through interface to an RTU (in lieu of connector TB3) (see Table 1).
3.3.2 Terminal Block TB3
3-Pin Terminal Block TB3 typically accommodates pass-through power to the associated
Control
Wave RTU but could act as the Loop Supply input power interface (in lieu of
connector TB1) (see Table 1).
3.3.3 Terminal Block TB2
8-Pin Terminal Block TB2 accommodates distribution (four pairs of wiring terminals) of
reg24Vdc loop power (see Table 2).
3.4 PART NUMBERS
400095-01-7 Snap Track Mount
721708-01-3 Panel Mount
721708-02-1 35mm DIN Rail Mount
3.5 DIMINSIONS
Dimensions are provided in Figure 6.
Содержание ControlWave MICRO
Страница 14: ...PIP ControlWaveLS Page 5 Figure 3 Encapsulated ControlWave Loop Supply Mounting Diagram ...
Страница 16: ...PIP ControlWaveLS Page 7 Figure 4 ControlWave MICRO EFM Loop Supply to I O Module Wiring ...
Страница 21: ...Page 12 PIP ControlWaveLS Figure 6 Loop Supply Dimensions Drawing ...
Страница 23: ...Return to the Table of Contents Return to the List of Manuals ...
