CHD200G series Fingerprint Reader
3
3.2 Operation
3.2.1 Fingerprint scan method
To take HD fingerprint image, , finger should be close to touch fingerprint sensor and refer to
below picture and use correct method to scan the fingerprint:
Remark: Pic a and Pic b as the right way, Pic a as face, Pic b as side. Pic c, Pic d and Pic e
as wrong way.
Put the finger and wait more than 0.5s! One user can have three fingerprints, here advice
one user register 1 or 2 fingerprints.
3.2.2 Simply operation method
Connect the device by RS485 with the computer, use software to manage, and do the
following operations:
3.2.2.1 Register User
Using software to register user information, include User ID, Fingerprint Index No. (No. in
the registered fingerprint database), Card No., backup password;
3.2.2.2 Register fingerprint
Using software to register, maximum fingerprint eigenvalue as 1664 bytes.
3.2.2.3 Register fingerprint
Using software to register the registered fingerprint, if not register in the device first.
3.2.2.4 Standalone mode
Input fingerprint, swipe card or press keypad, then output the set Wiegand format date.
3.2.2.5 Swipe card with fingerprint
Swipe card first, scan the fingerprint in the 10s of the associated fingerprint, if input
succeed, will output the User ID by the set Wiegand input format. If the device is as Out
direction, output Wiegand 29 only. Press button to output the keypad signal.
3.2.2.6 ID with fingerprint
Input User and press # as the end, input the fingerprint in 10s, if succeed, will output the
User ID by the set Wiegand input format. If the device is as Out direction, output Wiegand 29
only. Swipe card to output the associated Card No.
Pic a
Pic b
Pic c
Pic d
Pic e
