8
U.L. Model No.: CF245L & CF253L
3. Ceiling Fan Assembly
(Continued)
CEILING
COVER
PIN
DOWNROD
HANGER
BALL
SET SCREW
Figure 10
3.10
Route the three Motor Leads through the Hanger Ball
(Figure 10).
Reinstall the Hanger Ball on the Downrod as follows:
Position the Pin through the two holes in the Downrod and
align the Hanger Ball so the Pin is captured in the groove
in the top of the Hanger Ball (Figure 10).
Pull the Hanger Ball up tight against the Pin and securely
retighten the Phillips Head Set Screw in the Hanger Ball
(Figure 10).
A loose Phillips Head Set Screw could create fan wobble.
COUPLER
COVER
GROMMET
DOWNROD
Figure 8
3.8
Make sure the Grommet is properly installed in the Coupler
Cover, then slide the Coupler Cover on the Downrod until it
rests on the Motor Housing (Figure 8).
CEILING
COVER
DOWNROD
Figure 9
3.9
Place the Ceiling Cover over the Downrod (Figure 9).
Be sure that the Ceiling Cover and the Coupler Cover are
both oriented correctly (Figure 9).
