Emerson Centellis 2000 Shelf Release 3.0, Руководство пользователя

Страница: 130 / 194

Network Management and System Access
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99F )
130
shm9s8:~ # hpiship -n 8449 -i 200.200.0.0
8.3.3.3 Configuration File
By default, the shelf manager automatically reads the shelf IP connectivity record and
calculates IP addresses based on the described scheme.
Alternatively the shelf configuration for SGA and IP may be configured using the network
configuration file.
The network configuration of the MF106 can be modified by settings available in
/etc/network.conf
. The
/etc/network.conf
file is part of the persistent file system
by default, so any changes are automatically saved across a reboot.
z
Shelf Address
The Shelf Address can be read through IPMI or it can be defined as a different value by using
the SA variable.
Use
auto
to read the value via IPMI or define the desired Shelf Address.
SA=auto
z
Slot Number
The slot number of the Shelf Manager is read via IPMI unless the SLOT variable is used to
override the value. Use
auto
to read the value via IPMI or define the desired slot number.
The
REM_SLOT
variable is the slot number of the other Shelf Manager.
SLOT=auto
REM_SLOT=auto
z
Out-of-band Network Configuration
The front panel ethernet interface can be configured automatically using the Shelf Address
(default), using DHCP, or by specifying a static IP address.
Use the following parameters to the
OOB_MODE
variable to define the out-of-band
interface configuration.
none - Do not configure the interface