background image

10

U.L. Model No.: CF787

IMPORTANT CARE INSTRUCTIONS

for your Ceiling Fan

Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth
to avoid scratching the finish.

Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.

Maintenance

Accessories

Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of an electrical shock.

This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.

The use of any other control not specifically
approved for this fan could result in fire, shock and
personal injury.

1.

Ceiling Fan Light Kits (see store or catalog).

2.

Ceiling Fan/Light Controls (see store or catalog).

3.

Downrod Extension Kits (see store or catalog).

4.

Ceiling Fan Blades (see store or catalog).

WARNING

!

WARNING

!

WARNING

!

Using Your Ceiling Fan

REVERSE
SWITCH

IMPORTANT

Fan installation must be completed, including the
installation of the fan blades, before testing of the
controls.

1.

Restore electrical power to the outlet box by turning
the electricity on at the main fuse box.

2.

Check the operation of the fan by sliding the bar of
the control through the four positions marked 1 - 4
(“0” position is OFF) (Figure 18).

3.

All fans are shipped from the factory with the
reversing switch positioned to circulate air
downward. If airflow is desired in opposite
direction, turn your fan OFF and wait for the blades
to stop turning, then slide the reversing switch to
the opposite position, and turn fan on again 
(Figure 19).

4

0

3

2

1

Figure 18

Figure 19

4.

The fan blades will turn in the opposite direction
and reverse the airflow. 

Reverse Switch Information

Season

Rotation Direction

Switch Position

Summer

Counter-Clockwise

Right

Winter

Clockwise

Left 

Содержание CARRERA GRANDE CF787 series

















Отзывы: