![background image](http://html.mh-extra.com/html/emerson/bristol-392951-01-0/bristol-392951-01-0_instructions-manual_21559016.webp)
PIP-EXPTIBS Page
7
Expansion Transmitter Interface Bds.
2.2 FIELD WIRING
The device uses compression-type terminals that accommodate up to #14 AWG wire. A
connection is made by inserting the bared end (1/4 inch Max.) into the clamp beneath the
screw and then securing the screw. Insert the bared end fully to prevent short circuits.
Allow some slack in the wires when making terminal connections. The slack makes the
connections more manageable and minimizes mechanical strain on the printed circuit
boards and harnesses.
2.2.1 Terminal Connections
ETIB Boards contain two terminal blocks that field wiring connections to the
transmitter(s). TB1 & TB2 are two-position Terminal Blocks which connect to the
signal/power inputs of the transmitters.
Figure 7 - Internally Powered Transmitter Field Wiring