![background image](http://html.mh-extra.com/html/emerson/bristol-392951-01-0/bristol-392951-01-0_instructions-manual_21559013.webp)
PIP-EXPTIBS Page
4
Expansion Transmitter Interface Bds.
Figure 3 - Expansion TIB Mounted on TeleRTU CPU Board
To remove the optional Expansion Transmitter Interface Board, follow steps 1 through 7
below. To replace the ETIB Board follow steps 2 and 6 below in reverse order, installing
rather than removing the item in question and then perform step 7 (see Figures 4 & 5).
Note:
Any PC Board is not to be removed under any circumstances unless the
TeleFlow/TeleRTU has been moved to an ESD safe area (see ESDS Manual S14006).
The CPU Board should typically only be removed to replace the on board Lithium
Battery or Fuse F1 or to install an optional I/O Expansion Board or an Expansion
TIB Board.