WARNING:
To avoid fire, shock, and serious personal injury, follow these
instructions.
Safety Instructions
1. Read your owner’s manual carefully and keep it for future reference.
2. Before servicing or cleaning unit, switch power off at service panel and
lock service panel disconnecting means to prevent power from being
switched on accidentally. When the service disconnecting means cannot
be locked, securely fasten a warning device, such as a tag, to the service
panel.
3. Be careful of the fan and blades when cleaning, painting, or working near
the fan. Always turn off the power to the ceiling fan before servicing.
4. Do not put anything into the fan blades while they are turning.
5. Do not operate reversing switch until fan blades have come to a complete
stop.
Additional Safety Instructions for Installation
1. To avoid possible shock, be sure electricity is turned off at the fuse box
before wiring, and do not operate fan without blades.
2. The installation is to be in accordance with the National Electrical Code,
ANSI/NFPA 70-1999 and Local Electrical Codes. Use the National Electrical
Code if Local Codes do not exist. The ceiling fan must be grounded as a
precaution against possible electrical shock. Electrical installation should
be made or approved by a licensed electrician.
3. The outlet box and joist must be securely mounted and capable of reliably
supporting at least 50 pounds. Use only U.L. outlet boxes listed as
“Acceptable for Fan Support”, and use the mounting screws provided with
the outlet box. Most outlet boxes commonly used for support of light
fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
4. The downrod furnished with the fan provides the minimum recommended
floor to fan blade clearance for a 8 foot ceiling.
5. The fan must be mounted with the fan blades at least 7 feet from the floor
to prevent accidental contact with the fan blades.
6. Follow the recommended instructions for the proper method of wiring
your ceiling fan. If you do not know enough about electrical wiring, have
your fan installed by a licensed electrician.
NOTE:
This fan is suitable for use with solid-state speed controls.
WARNING:
To reduce the risk of fire or electric shock, this fan should only
be used with fan speed control Model No. UC7067RC, manufactured by Rhine
Electric Co., Ltd.
WARNING:
This product is designed to use only those parts supplied with
this product and/or any accessories designated specifically for use with this
product by Emerson Electric Co. Substitution of parts or accessories not
designated for use with this product by Emerson Electric Co. could result in
personal injury or property damage.
WARNING:
To reduce the risk of personal injury, do not bend the blade
flange when installing the blade flanges, balancing the blades or cleaning the
fan. Do not insert foreign objects in between rotating fan blades.
WARNING:
To reduce the risk of electrical shock, this fan must be installed
with an isolating wall control/switch.
!
WARNING
DATE CODE:
The date code of this fan may be found on the box, stamped in ink on a white label. You should
record this data above and keep it in a safe place for future use.
2
U.L. Model No.: CF180
BP7357 CF180 BRIDGETON 9/19/07 11:21 AM Page 2
