June 2021
Installation, Operation and Maintenance Manual
VCIOM-15749-EN Rev. 0 Rev. 0
6
Installation
Section 3: Installation
6
Connect cable between display cover and logic board. Perform a Firmware update now,
before installing display cover on the unit. This update is important for the following
programming steps (use FW version display 1507, logic 219 or higher). For a detailed
description on how to perform a firmware update, please refer to separate manual.
During display cover installation, pay attention to the O-ring which must be sit correct
between cover and housing and fix it with the 4 hexagon socket screws.
Figure 10