ASCO Connectivity Solutions
ASCO Power
Quest
®
and
Site
Web™communications products allow for the monitoring and control of power transfer switches
in your Emergency or Standby Power Distribution System. Local Area Networks and Remote networks are supported with
either single or multiple points of access, and web-enabled communications allow access to your power system from
anywhere around the world.
Features
l
Monitors and Controls Power Transfer Switches and Engine Generators
l
Monitors Normal and Emergency Voltages and Frequency
l
Indicates Transfer Switch Position and Source Availability
l
Provides Transfer and Retransfer of Loads for System Testing
l
View Normal and Emergency Voltage and Frequency Settings
l
View Transfer Switch Time-Delay Settings
l
Provides Transfer Switch Rating and Identification
l
Automatic Paging Notifies Personnel, by E-mail or Pager, of Selected System Alarms
l
View Current, Power and Power Factor with ASCO Power Managers Connected to the System
Series 300
Power Monitoring & Control
Power
Quest
®
VP
i
is a PC based software package. When combined with the ASCO Communication Interface Module (Acc 72A), the ASCO 5120 Telephone
Interface Module and ASCO 5200 Series Power Manager, as shown above, it provides the most economical communication system for monitoring and control
of power transfer switches and engine generators.
The local RS-485 network allows communications with up to 32 power transfer switches and four engine generators. An analog phone connection and ASCO
telephone interface module allow for direct dial up, monitoring and control of remote locations. The ASCO Power Manager not only allows you to view current
power and power factor readings, but also has a programmable KW set point to initiate transfer of loads to a standby source for peak shaving operations.
Power
Quest
®
Site
Web
TM
is a client-server application requiring no software to be installed on the client computer. When combined with the ASCO Communication Interface
Module (Acc 72A), the ASCO 5500 Series Thin Web Server and the ASCO 5200 Series Power Manager, as shown above, it provides the most comprehensive
Intranet and Internet communication system for the monitoring and control of power transfer switches and engine generators located in your emergency or
standby power distribution system.
The
Site
Web
TM
communication system allows multiple client access, from local or remote locations, and provides for the monitoring of up to 64 power
transfer switches and eight engine generators. In addition, automatic paging is provided for all alarm signals.
15
14
