background image

© 2020 Emerson. All rights reserved.

Emerson.com/FinalControl

Before installation, these instructions must be carefully read and understood.

ANDERSON GREENWOOD

 WHESSOE 4110A VACUUM RELIEF VALVE

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS

SAFETY PRECAUTIONS

READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE INSTALLING, OPERATING 
OR PERFORMING MAINTENANCE ON WHESSOE 4110A VACUUM RELIEF VALVE. FOLLOW 
ALL PRECAUTIONS AND WARNINGS NOTED HEREIN WHEN INSTALLING, OPERATING OR 
PERFORMING MAINTENANCE ON THIS EQUIPMENT.

SAFETY PRECAUTION DEFINITIONS

CAUTION

Damage to equipment may result if this 
precaution is disregard.

WARNING

Direct injury to personnel or damage to 
equipment that can cause injury to personnel 
may resultif this precaution is not followed.

NOTE

This manual is issued for guidance only 
and does not affect our standard terms and 
conditions and our Product Limited Warranty, 
all of which are available upon request.

VCIOM-15110-EN 20/04

Содержание ANDERSON GREENWOOD WHESSOE 4110A

Страница 1: ...0A VACUUM RELIEF VALVE FOLLOW ALL PRECAUTIONS AND WARNINGS NOTED HEREIN WHEN INSTALLING OPERATING OR PERFORMING MAINTENANCE ON THIS EQUIPMENT SAFETY PRECAUTION DEFINITIONS CAUTION Damage to equipment may result if this precaution is disregard WARNING Direct injury to personnel or damage to equipment that can cause injury to personnel may resultif this precaution is not followed NOTE This manual is...

Страница 2: ...inc Plated Steel 6 O ring Seal Nitrile Nitrile Nitrile Nitrile 7 Sealing Washers G Fiber G Fiber G Fiber G Fiber 8 Pallet 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 9 Pallet Stem 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 10 Pallet Guide Posts 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 11...

Страница 3: ...with new parts d reassemble in reverse order 4 Inspect valve seat item 3 for wear and regrind or replace where necessary 5 Clean seating surface thoroughly with suitable solvent and apply a thin smear of light spindle oil 6 Generally clean inside of valve remove all foreign matter and repaint exterior where possible to prevent corrosion 7 Replace pallet with lead disc if fitted 8 Replace valve cov...

Страница 4: ...ctric Co Emerson Automation Solutions Emerson and the Emerson logo are trademarks and service marks of Emerson Electric Co All other marks are the property of their respective owners The contents of this publication are presented for informational purposes only and while every effort has been made to ensure their accuracy they are not to be construed as warranties or guarantees express or implied ...

Отзывы: