![background image](http://html.mh-extra.com/html/emerson/80-series/80-series_manual_104539029.webp)
80 Series Thermostats
29
Application Selection Jumpers
Conventional & Universal Models
RC / RH Jumper
•
Single Transformer Systems
Don’t
Clip Jumper
–
The thermostat electrically connects the
RC (Hot Leg of the Cooling Transformer)
and the RH (Hot Leg of the Heating
Transformer) so a jumper is not required
•
Two Transformer Systems
Clip
Jumper
–
If there is a separate wire for RC and RH,
clip the RC/RH jumper on the back of the
thermostat.
–
This will isolate both terminals so they can
be independently used.
Heat Pump Models
W2 / E Jumper
•
Combined Aux and Emergency Heat
Don’t Clip Jumper
–
The Heat Pump thermostat electrically
connects W2 and E terminals so you do not
need to install a jumper wire.
•
Independent Aux and Emergency Heat
Clip Jumper
–
If there are separate W2 and E wires, clip the
W2/E jumper located on the back of the
thermostat.
–
Setting system switch to Aux results in
auxiliary heating with no compressor
operation.
For Two Transformer Systems, improper phasing will result in damage to the transformer.
Содержание 80 Series
